Original Threaded Connection Nut for Swing Plus and Azuro Filters

2,62 €

+26 points in “Joy Club” +1 000 bonus points on the second online purchase · terms

Dark plastic nut with an internal thread and a ribbed outer surface, tightened by hand. It holds the connections of Swing Plus and Azuro 5 sand filters firmly in place.

  • Tightens without tools
  • Swing Plus 10, 14, 18 and Azuro 5
  • Made by Mountfield

Frequently bought together

Total for selected:

Description

What This Nut Is

This is a dark plastic nut with an internal thread. It pulls the connecting element against the body of the sand filter and keeps the connection secure. It is made by Mountfield for Swing Plus and Azuro filters.

Specifications

Manufacturer codeMT06130
ManufacturerMountfield
Typeconnection nut with internal thread
Compatibilitysand filters Swing Plus 10, 14, 18 and Azuro 5

Which Units It Fits

  • Swing Plus 10 – code 3BTE0513
  • Swing Plus 14 – code 3BTE0514
  • Swing Plus 18 – code 3BTE0515
  • Azuro 5 – codes 3BTE0542 and 3BTE0547

How It Works

The nut presses the seal into place and stops the connection from working loose. The textured surface is easy to grip with your fingers, so no wrenches are needed. When the thread wears out or the plastic cracks, water starts to leak from the connection.

Signs It Is Time to Replace It

  • a crack in the body of the nut
  • chipped or crushed thread teeth
  • a connection that works loose during operation
  • a nut lost during disassembly

The Advantage of the Original

The part is made to the dimensions of the specific models, so it fits without any modification. Non-original equivalents are sometimes off by a millimetre, which leads to another leak.

Replacement Step by Step

  1. Stop the pump and shut off the water supply to the filter.
  2. Unscrew the worn nut and check the condition of the seal beneath it.
  3. Replace the seal as well if necessary.
  4. Screw on the new nut carefully so as not to cross the thread.
  5. Tighten by hand, turn the water back on and check the connection for leaks.

Caring for Plastic Threads

Before winter, clean and inspect all connections. Store removed parts in a dry, dark place. Do not use power tools to tighten plastic. Do not fit a new part onto a neighbouring component that is already deformed.

What You Get

One original Mountfield spare part with code MT06130. Before ordering, compare the code and model of your filter. If you are unsure, send us the model and a photo of the old nut and we will check compatibility.

See also: Wellness, Pools and Equipment, Spare and Other Parts, Pool Spare Parts, For Filters and Other Equipment, For Prefabricated Pools, Pool Liners, Pool Underlays.

You may also like

More from Mountfield

Newsletter

News, promotions and ideas for home and garden

Subscribe to our newsletter to receive news about promotions, new products and other useful information.