Description
A spare part from the Mountfield catalogue for inflatable Swing and Polygroup pools whose walls have fittings. The pieces fit into each other and thus connect the fitting to the hose and to the pool cleaner.
How it is built
The first piece has a large flange and a connector onto which the hose from the suction side of the filter is fitted. The second is shorter and has the same two sealing rings, which improve the tightness of the connection. The photos show white plastic parts with two black rings each.
Technical data
| Brand | Mountfield |
|---|---|
| Part type | wall fitting adapter, split in two |
| Pools | inflatable Swing and Polygroup pools equipped with wall fittings |
| Colour | white |
| Design | both pieces have sealing rings |
| What it connects | vacuum or hanging skimmer to the filter |
Advantages
- The split design offers more options when connecting
- Suitable for pools with installed wall fittings
- The vacuum connects to the filter
- Can accommodate a hanging skimmer
- Sealing rings on both parts
Other uses
According to the manufacturer, the adapter also works for a hanging skimmer or similar accessories with the same type of connection. It differs from the classic adapter that screws onto the fitting – here the two parts are pushed into each other.
Use
- Push the first piece into the opening of the fitting.
- Attach to its connector the hose coming from the suction of the filter.
- Add the second piece and connect the vacuum to it.
Make sure the joints are tight. Check before switching on the filter. Then remove the parts and keep them in a dry place so they do not get lost.
Get it if your old adapter is lost or broken. First find out what kind of fitting your pool has.
See also: Wellness, Pools and Equipment, Spare and Other Parts, Pool Spare Parts, For Filters and Other Equipment, For Prefabricated Pools, Pool Liners, Pool Underlays.
