Description
About the Screw
This small fastener tightens the clamp around the body. The thread diameter is M5, the screw is 35 mm long and has a round head. It is suitable for Swing Plus, ProStar and Azuro, and replacing a lost or damaged one takes only minutes.
Data
| Manufacturer item number | MT06143 |
|---|---|
| Brand | Mountfield |
| Purpose | fastener for the filter clamp |
| Thread diameter | M5 |
| Screw length | 35 mm |
| Compatibility | sand filters Swing Plus, ProStar, Azuro |
Which Filters It Applies To
- Swing Plus 10, 14 and 18 – codes 3BTE0513, 3BTE0514, 3BTE0515
- ProStar 2, 4 and 6 m³/h PLUS – codes 3MAR0802, 3MAR0803, 3MAR0804
- ProStar 4000 and 6000 – codes 3MAR0867, 3MAR0868
- Azuro 5, 5 Profi, 5 EXP and 7 – items 3BTE0542 / 3BTE0547 / 3BTE0550 / 3EXB0588 / 3BTE0588
- 5 m³ model – item 3EXX0771
The exact thread and length guarantee a secure fastening without damaging the seat. The screw is part of the clamp and fits the Swing Plus 4 m3/h set.
Role in the System
The screw tightens the clamp that joins the parts of the filter, so the connection withstands the water pressure. If it is missing, the clamp stays loose.
When to Replace It
Replace it if the thread is stripped, the head is worn or there are signs of rust. Do not overtighten it, to avoid damaging the seat.
Installation
Switch off the pump and release the pressure from the unit. Unscrew the old screw, clean the seat, screw in the new one and tighten it evenly. Start the pump and check for leaks.
Before You Order
- Measure the length of the old screw.
- Check the thread and the shape of the head.
- Find your filter in the list above.
- Replace all damaged screws on the clamp.
Check the clamp at the start of every season and do not tighten it with excessive force.
See also: Wellness, Pools and Equipment, Spare and Other Parts, Pool Spare Parts, For Filters and Other Equipment, For Prefabricated Pools, Pool Liners, Pool Underlays.
