Description
If your pool hoses do not match the opening of the filter, this Intex adapter solves the problem in minutes. It is designed for the Krystal Clear™ sand filter (capacity 4 m³/h) and handles two common diameters – 32 and 38 mm. One piece is included in the pack.
What the adapter gives you
- Lets you use the hoses you already have without buying new ones.
- The 2.5-inch internal thread screws directly onto the filter connection.
- Covers two hose sizes with the same part.
Product data
| Manufacturer | INTEX |
|---|---|
| Manufacturer code | 3BTZ0076 |
| Suitable unit | Intex Krystal Clear™ (sand, 4 m³/h) |
| Suitable hose | 32 or 38 mm |
| Thread | Internal, 2.5 inch (2.5") |
| Quantity in the pack | 1 piece |
Installation steps
- Stop the filter system and disconnect it from the power supply.
- Remove the existing fitting from the filter inlet.
- Screw the adapter onto the internal thread.
- Attach the 32 or 38 mm hose.
- Before switching the unit on, check the connection for leaks.
Before you order
Make sure your filter is exactly the model the part is intended for, and measure the diameter of the hose. If in doubt, write to us and attach a photo of the old liner – we will check it against the catalogue.
See also: Wellness, Pools and Equipment, Filters and Treatment, Pools, Pool Chemicals, Pool Accessories.
