Description
Fixing the ladder when the surround is already finished
These flange anchors are the solution for cases where cladding has already been laid around the pool and new sockets cannot be made in the concrete. The pack contains two anchors made of stainless steel – a material that copes well with constant moisture. The flange sits flat on the hard base and requires no additional embedding.
Parameters
| Installation | on a finished hard surround |
|---|---|
| Tube length | 113 mm |
| Tube diameter | 36.8 mm |
| Flange thickness | 4.5 mm |
| Flange diameter | 90 mm |
| Material | stainless steel |
| Set | 2 pieces |
| Catalogue code | 3BPZ0066 |
| Manufacturer's article number | 3EXX0472 |
| Brand | Mountfield |
Which ladders they fit
They fit the Slim, Standard and Comfort ladders, as well as any other pool ladder with a Ø 43 mm mounting tube. Before ordering, measure the tube of your ladder to make sure it will fit.
Advantages of the flange shape
- the load is spread over a larger area of the surround;
- there is no need to break up the cladding or concrete again;
- they are convenient when a ladder is added to a finished pool;
- the original Mountfield set is also a good choice for replacing old or damaged anchors.
Before installation
- Make sure the anchors match the model of your ladder.
- Inspect the base – it must be hard, level and have sufficient load-bearing capacity.
- Choose a fixing method according to the material of the surround.
- Follow the installation instructions of the ladder itself.
Careful preparation ensures that the ladder will stand firmly and be safe when climbing in and out.
Not sure this is the part you need?
Send us the brand and model of your ladder plus a photo of the old element, and before you order we will check whether it fits.
See also: Wellness, Pools and Equipment, Pool Accessories, Pool Ladders, Ladder Spare Parts, Azuro Pool Ladders, Handrails, Ladders for In-ground Pools.






















