MT00877 – white 46×46 cm embossed ladder platform

46,60 €

+466 points in “Joy Club” +1 000 bonus points on the second online purchase · terms

Original white 46×46 cm platform with an embossed surface, from Mountfield – fits the De Luxe, Galaxy and their stainless-steel versions.

  • 46×46 cm square, white
  • Embossed surface
  • Manufacturer code MT00877

Frequently bought together

Total for selected:

Description

The top step of a pool ladder bears your weight every time you climb in or out. If your platform is cracked, yellowed or wobbly, the Mountfield MT00877 is the right replacement: a white square with 46 cm sides, made specifically for the De Luxe, De Luxe stainless steel and Galaxy ladders.

Key specifications

Itemtop platform for a ladder
Manufacturer codeMT00877
BrandMountfield
Dimensions46×46 cm
Colourwhite
Intended forladder models: De Luxe, Galaxy and the stainless-steel version

Which ladders and pools it works with

  • De Luxe – codes 3BPZ0068 and 3BPZ0263
  • De Luxe stainless steel – codes 3BPZ0083 and 3BPZ0265
  • Galaxy – codes 3BPZ0112 and 3BPZ0264
  • 1.3 m high version – code 3EXX0410
  • Pool models: 400 DL, 401 DL, 402 DL, including the EXP and OLYMPIC versions

The part is made to the dimensions of these ladders – the holes line up and no extra machining is needed.

What the platform does

It is the landing at the top of the ladder that you step onto before moving to the water or the pool walls. The surface is embossed with a diamond pattern, and holes for the fasteners are drilled in the corners.

Signs it is time to replace it

  • a visible crack or deformation
  • worn patches on the surface
  • a step that wobbles

The ladder is the main safe way into the pool, so a damaged platform should not be left for later.

Installation steps

  1. Take the ladder out of the pool and lay it on a level surface.
  2. Unscrew the fasteners of the old platform.
  3. Put the new one in place and secure it through the corner holes.
  4. Tighten all the screws and check that the structure is stable.

Before you order

  1. Measure the old part along its full length.
  2. Compare the position of the holes in the corners.
  3. Find your ladder's code in the list above.
  4. Check the other steps for cracks as well.

When repairing, the 494 mm step, the white step sleeve and the blue step are often replaced too.

Care and maintenance

Wash the embossed surface from time to time with a soft brush and a non-abrasive cleaner so that dirt and algae do not build up. Once a season, also check that the screws are tight.

See also: Wellness, Pools and Equipment, Pool Accessories, Pool Ladders, Ladder Spare Parts, Azuro Pool Ladders, Handrails, Ladders for In-ground Pools.

You may also like

More from Mountfield

Newsletter

News, promotions and ideas for home and garden

Subscribe to our newsletter to receive news about promotions, new products and other useful information.