Description
The Mountfield leaf trap (code 3BTE0520) works with semi-automatic pool vacuums and manual vacuum heads. It holds back leaves, twigs and pebbles before they reach the filtration pump.
Principle of operation
The trap is connected along the hose line – after the vacuum head and before the pump. Coarse particles stay in the mesh bag inside the body, so the pump stays safe and any non-return valve in the water circuit does not get clogged. Through the transparent body you can see when the bag is full.
It connects to a pool hose of Ø 38 mm, and if the size does not match, use the included adapters and the swivel end.
What it consists of
- filter bag
- swivel connector
- two adapters (A and B)
- body made of transparent material
- O-ring seal
- lid with ring and handle
Connection and operation
- Connect the body and the pool vacuum using two Ø 38 mm hoses.
- Place everything under water until the air escapes.
- Finally, attach the hose to the skimmer and start the pump.
- Then collect the debris as usual.
Emptying and maintenance
Stop the pump and disconnect the hoses. Take hold of the handle, turn the lid to “open” and take out the bag; rinse it, put it back in the body and close it. When closing, the three pins on the lid must slide into the three grooves of the ring. Check the O-ring, replace it if necessary and lubricate it with a petroleum-free grease.
It is most useful in late autumn, when many leaves float in the water.
Technical specifications
| Brand | Mountfield |
|---|---|
| Type | leaf and debris trap for a pool vacuum |
| Intended for | semi-automatic pool vacuums, manual vacuum heads |
| Set | bag, swivel connector, adapter A, adapter B, O-ring, lid with ring, body |
| Filter element | mesh filter bag |
| Connection | pool hose Ø 38 mm |
| Item number | 3BTE0520 |
See also: Wellness, Pools and Equipment, Pool Accessories, Pools, Pool Chemicals, Filters and Treatment.
