Holder bar no. 1 for telescopic pole pool cover

2,04 €

+20 points in “Joy Club” +1 000 bonus points on the second online purchase · terms

An original plastic bar with two holes (version 1) that connects the pool cover to the Mountfield telescopic roll-up pole.

  • Straight bar with two holes
  • Fits all three pole sizes, from 2.7 to 7.1 m
  • Original Mountfield part, code MT05555

Frequently bought together

Total for selected:

Description

The holder bar is the small part that keeps the cover attached to the pole while you roll it up or unfold it. Version 1 is a straight plastic bar with two holes. When it is broken or has been lost during disassembly, the cover can no longer be rolled up properly and the holder needs to be replaced.

Part data

Part numberMT05555
BrandMountfield
Typecover holder, version 1
Compatibilitythree telescopic poles – from 2.7 to 7.1 m

Compatible poles

  • 3BPZ0057 or 3EXX0467 – roll-up pole, range 2.7–4.4 m
  • 3BPZ0058 or 3EXX0468 – roll-up pole, range 3.7–5.4 m
  • 3BPZ0059 or 3EXX0469 – pole with a range of 5.4–7.1 m

What the bar does

It attaches to the pole through its two holes and gives the cover a stable support. Thanks to it, the sheet does not shift while being rolled up and its edge does not get torn. That is why a cracked or torn holder should not be left for later.

Signs that it is time to replace it

  • the bar is cracked or snapped
  • one of the holes is torn
  • the part is missing after disassembly or winter storage

Step-by-step installation

  1. Lay the pole on a flat surface.
  2. Remove the damaged holder, noting how it was positioned.
  3. Keep in mind that the version 2 holder works together with this one.
  4. Fit the new bar in the same place through its holes.
  5. Secure it and check that the cover is held firmly.

Advantages of the original

The part is made by Mountfield specifically for these poles, so it needs no modification. Non-original substitutes sometimes differ by a few millimetres, and that is enough for the problem to come back. Check the code MT05555 and the model of your pole before you order.

Care and storage

Before winter, clean and inspect all the connections. Keep disassembled parts dry and in the dark. Do not tighten plastic threads with a power tool. A new holder should not be combined with neighbouring parts that are already deformed.

The holder is for accessories of the telescopic pole. You will find pool covers in the relevant category of the shop; the other version of this part is bar no. 2. More spare parts can be found in the pool accessories section.

See also: Wellness, Pools and Equipment, Saunas, Hot Tubs & Spas, Inflatable Products.

You may also like

More from Mountfield

Newsletter

News, promotions and ideas for home and garden

Subscribe to our newsletter to receive news about promotions, new products and other useful information.