Description
The Cáceres The mosaic is made of glass ceramic, entirely from recycled glass. The surface is densely covered with miniature rosettes and leaves in a muted, antique tone. From a distance they blend into a soft greenish texture, while up close every detail of the ornament can be seen. The chips measure 50 × 50 mm, are 6 mm thick and come mounted on ready-made sheets that are quick to lay.
The model at a glance
- Item no. MOSFBZDJ012
- Sheet size: 340 × 340 mm
- Chip: 50 × 50 mm, printed pattern
- Shade – grey-green fine ornamental pattern
Where it looks best
- Bathroom and spa area
- Kitchen
- Art Nouveau-style wall where you want antique decoration
- Decorative panels and borders
Material qualities
- Non-porous. Water absorption is up to 0.04%, so the surface does not grow mould and does not soak up stains or odours.
- Lasting colour. The shade does not fade in sunlight (ISO 4892) or from cleaning products (class A under ASTM C650).
- Frost-resistant. It withstands repeated freezing and thawing (ASTM C1026), so it also suits outdoor use.
- Strong. Flexural strength is 55 N/mm² (EN ISO 10545-4), and the surface is smooth and free of defects.
- Eco-friendly. Contains 100% recycled glass, with no lead or cadmium pigments and no heavy metals.
Silicone dot backing
The Cáceres chips are joined at the back by small dots of silicone (polyurethane) that do not cover the whole back. This leaves over 95% of each chip exposed to the adhesive, so the bond is especially strong. The backing adds no thickness, is not affected by the adhesive and grout, and does not warp in storage.
The sheet itself bends easily, so it follows curved walls, steps and corners with ease.
| Feature | Silicone dots | Mesh | Paper |
|---|---|---|---|
| Back exposed to the adhesive | over 95% of the surface | less – part of the back is under the mesh | the whole back is free, but the paper covers the face |
| View while bonding | chips and joints are visible | chips are visible | chips are under the paper |
| Curves and corners | very easy | easy | difficult, the paper tears |
| After installation | nothing to remove | nothing to remove | the paper is soaked and peeled off |
Technical specifications
| Parameter | Value |
|---|---|
| Item code | MOSFBZDJ012 |
| Shade | grey-green fine ornamental pattern |
| Surface | square chips, printed pattern |
| Size of each chip | 50 × 50 mm |
| Chip thickness | 6 mm |
| Sheet dimensions | 340 × 340 mm |
| Sheets per square metre | 9 |
| Joint between chips | 2 mm |
| Construction | glass ceramic made of 100% recycled glass |
| Sheet backing | silicone (polyurethane) dots |
| Water absorption | no more than 0.04% (EN ISO 10545-3) |
| Flexural strength | 55 N/mm² |
| Frost | resistant (ASTM C1026) |
| Chemical resistance | class A (ASTM C650) |
| Application | bathrooms, showers, kitchens, spa centres, hammams, decorative walls |
| Packaging | carton of 1 m² |
| Unit of measure | 1 m² |
Laboratory tests
| Standard | What is measured | Result |
|---|---|---|
| EN ISO 10545-3 | Water absorption | no more than 0.04% |
| EN ISO 10545-4 | Flexural strength | 55 N/mm² |
| EN ISO 10545-2 | Surface defects | none (100% clean surface) |
| ASTM C650 | Chemicals | class A, no marks |
| ASTM C1026 | Freeze–thaw cycles | resistant |
| ISO 4892 | Ultraviolet exposure | the colour does not change |
| EN ISO 10545 | Temperature changes | resistant |
Grouting and choosing a colour
A grey grout keeps the calm look, while a green one accentuates the leaves.
In shower cubicles and other wet areas, use an epoxy or waterproof C2 grout – it keeps moisture out and does not darken. The joint width is 2 mm.
How much material to set aside
Measure the height and width of each wall to be tiled, work out the area and add an allowance for cutting – 5–10%. The packaging is a carton of 1 m², so round up to a whole carton and buy the full quantity at once, so that it comes from a single production batch with a uniform shade.
For the adhesive, allow about 2 kg per m² for chips up to 25 mm, 2.5 kg for 40 mm and 3 kg for larger ones. The grout is calculated with (A + B) / (A × B) × C × D × 1.6 kg/m²; for this model A and B are the chip dimensions (50 × 50 mm), C is the thickness (6 mm) and D is the joint (2 mm). These are only guidelines: the actual quantity depends on the substrate (whether it is level, how absorbent it is), the adhesive and grout chosen, the teeth of the trowel, the width and depth of the joint, the geometry of the pool or room and the installer's technique. Confirm the quantities against the product data sheets and with the contractor.
Installation steps
- Preparing the substrate. It must be dry, sound, free of dust and level – with a deviation of no more than 2 mm over 2 m. In the shower area, waterproofing comes first.
- Adhesive. Choose a white cement-based adhesive with elastic properties, class C2TE S1. Glass is slightly translucent, and grey adhesive would change its colour.
- Application. With a notched trowel (3–4 mm), spread the adhesive over an area sufficient for 2–3 sheets.
- Laying. Press the sheet down evenly with a rubber float and keep the same 2 mm joint between the sheets.
- Cutting. At corners and around fittings, cut through the silicone dots with a utility knife, and cut individual chips with glass mosaic nippers.
- Grouting. Wait a day. Near the shower, an epoxy grout or a waterproof class C2 grout works best.
- Cleaning. Remove excess grout with a damp sponge while it is soft; epoxy grouts straight away, with a special cleaner.
- Putting into use. The shower may only be used once the grout has fully hardened.
Tools and materials: rubber float, notched trowel with 3–4 mm teeth, C2TE S1 adhesive (white), grout – epoxy or waterproof, utility knife, special glass-cutting nippers, sponge, bucket, water.
Surface care
- For everyday cleaning, a damp sponge or a soft cloth with a neutral cleaner is enough.
- Avoid abrasive cleaners, wire brushes and acidic grout cleaners.
- After showering, go over the surface with a rubber squeegee – no water marks are left on the glass.
Frequently asked questions
What adhesive is needed?
White elastic cement-based adhesive C2TE S1 – it preserves the true colour of the glass.
What grout is suitable?
In wet rooms, choose epoxy or waterproof. A grey grout keeps the calm look, while a green one accentuates the leaves.
Can I buy less than one carton?
No – it is sold only in whole cartons of 1 m². Take the full quantity at once, so that the sheets come from the same production cycle.
Is it suitable for a pool with chlorinated water?
The mosaic is intended for walls and wet areas, and the glass does not react with cleaning products.
Can it go over old tiles?
Yes – if they are sound, clean and degreased, and primed with a suitable primer.
Why the colour in real life may differ
Glass reacts to its surroundings, so its colour can change, so a difference between photos, visualisations and the real mosaic is possible. Perception is affected by:
- the screen – settings, brightness and type of monitor, phone or tablet;
- lighting – sun, overcast sky, artificial light, the colour of the lamps, the time of day;
- the viewing angle – glass reflects differently;
- in a pool, the water alters the picture: depth, clarity, chemical composition and the reflected sky deepen the shade and push it towards blue;
- the chosen tone of the grout and adhesive, as well as the size of the tiled surface;
- neighbouring surfaces – coping, paving, walls, greenery;
- the batch – between two separate production runs the tone may differ slightly;
- natural differences between individual chips in mixes and in glass with special effects.
Images of pools and interiors are illustrations and show only the general impression.
See also: Wellness, Pools and Equipment, Cladding and Paving, Pools, Pool Chemicals, Pool Accessories.
