Description
This is a submersible light for illuminating a pool: 30 W at 12 V. At the front there is an aluminium frame, while the body itself is plastic; the water cools the LEDs so they do not overheat during long use. It is installed in a housing built into the pool wall.
Attention: the light runs on 12 V and is powered only through a safety transformer 230/12 V, which is not supplied and is bought separately (from the Atlas Pool transformers with a power of 50–600 W). Connection and installation are a job for an electrician.
Product data
| Atlas Pool catalogue numbers | HIA006, HIA007, HIA008, HIA009, HIA010, HIA006-L, HIA009-L |
|---|---|
| Weight | 2.6 kg (RGB versions – 2.7 kg) |
| Carton dimensions | 29×29×19 cm |
| Protection rating | IP 68 |
| Light source | LED |
| Installed | in a built-in housing |
| Construction | plastic, with an aluminium frame at the front; water cooling |
| Power | 30 W at 12 V |
| Brand | Atlas Pool |
Purpose
The light illuminates the pool from the inside and creates a cosy mood in the evening. The IP 68 rating means it is suited to being submerged in water, and the LEDs at 30 W give a strong light.
Light colours
- White – pure, bright light.
- Daylight – softer, close to natural.
- Blue – a deep blue shade of the water.
- RGB with 2 cables – changing colours.
- RGB with 4 cables – changing colours, four-wire connection.
For which pool
The product comes in two versions: the main one fits concrete pools lined with glass ceramic, and the second fits liner pools, where the choice is only between white light and RGB with two wires. Determine the type of pool before ordering.
Installation and connection
The housing is built into the wall during construction or renovation, after a pipe or channel for the cable has been run to the technical room. The wire goes to the transformer, and the connection there is made by an electrician. The power of the transformer must be at least equal to the sum of the power of all the lights. Work with the power switched off and never run the light in the dry.
What to consider before buying
- How many spotlights you need and what their total power is.
- A suitable transformer in terms of power.
- The desired shade – white, daylight, blue or changing RGB.
- For RGB – the version with two or four wires, depending on the controller.
One model covers both concrete pools and liner pools, and the choice of colours lets you set the atmosphere to your own taste.
See also: Wellness, Pools and Equipment, Pool Accessories, Pools, Pool Chemicals, Filters and Treatment.
